• カテゴリー別アーカイブ 日常
  • Solve the problem that the PC does not start but the fan keeps running

    The day before yesterday, I created a business card with an illustrator.
    After I finished work I shut down the PC.
    And yesterday. I switched on the PC to resume work …
    [Power switch] On

    [Bouwan] Fan turns

    [Fan stop in about 1 second]

    [Windows logo appearance on monitor]

    [Start up personal computer]
    In the usual case, I will be able to use the PC.

    However···

    [Power switch] On

    [Bouwan] Fan turns

    [Bouwan] continue turning, turning, turning, turning …

    Oh, I thought that the PC might have broken.
    I thought so, I turned off the power by long pressing the PC power button.

    Well, this PC is the main machine, but the C drive has only windows system and a few applications installed.
    In the worst case, I thought that it would be OK if I exchange only C drive.

    I did a Google search with another PC.
    The search result was “Power supply failure” or “CPU overheat” etc.

    I understood the clue of the cause.
    However, since I am planning to go out now, I decided to repair the next day.

    And repair scene.

    First of all, power supply refresh of the built-in battery is performed.
    1, Disconnect the power cable.
    2, Open the cover of the PC.
    3, Remove the button type battery of the motherboard.
    4, Press the power button to remove the electricity remaining on the motherboard.

    After that, I went out to buy a new button battery.
    I think that all the power remaining on the motherboard will disappear at this time.

    About an hour passed.
    I set a new button battery.
    After that, I connected the power cable while opening the PC cover.
    And I switched on the power button!

    [Power switch] On

    [Bouwan] Fan turns

    [Fan stop in about 1 second]

    Oh! It is likely to start …

    However, a message that OS can not be found in BIOS has appeared.DOS / V OS has requested the setting of the BIOS.
    The selection screen is either F1 or F2.
    I have selected function key F2.

    When BIOS was started, the date and time were reset as the button batteries were pulled out.
    First of all, this is fixed today.

    Next, I checked the existence of HDD.
    The PC recognizes the C drive and D drive.

    I have chosen C drive as the boot drive.
    Next I saved the situation and pressed the function key F1 to start the PC.
    Then the monitor screen turned black and the underbar cursor was blinking.

    In the previous HDD, a seek sound was made by physical access.
    However, since SSD is C drive now, I did not think that it is running.

    Try again, I pressed the function key F1 again.
    Then, after a while the startup screen of Windows 10 appeared.

    This time, I was able to solve the problem without hardship.
    This seems to be a lucky encounter.

    I did it after all.
    1, I unplugged the computer
    2, I took the cover and replaced the button battery
    3, I cleaned the CPU cooler and the surroundings of the fan
    4, I reviewed the BIOS settings

    This time my PC was able to be repaired well.
    However, I am planning to buy reusable i5 class machines.

    Diskette drive 0 seek failureのPress F1 to continue, F2 to enter SETUPを変更する


  • I went to the northern side observatory of the Tokyo Metropolitan Government Office so I took a picture.

    I climbed up the free observation deck of Tokyo Metropolitan Government building in Shinjuku.
    These are the pictures I took at that time.

    Beneath is Shinjuku Central Park.

    It seems that the house continues to a mountain in the distance.

    When the weather is good, I can see Fuji Mountain in this direction …
    Unfortunately, I can not see Fuji Mountain today,because there are clouds in the distance.

    You can see that a little tall building is built along the main street.

    In the center of Tokyo, buildings and houses are dense …

    Thsi is a cloudy part that is visible in the back left.
    I shot with zooming in focus on the digital camera.

    If my memory is right, this picture is taken in the direction of Nakano station.

    A model of the Tokyo Metropolitan Government was exhibited, but I am disappointed with a slightly unfavorable exhibition …
    What is it? Cheap desk light on the right side …

    On the first floor of the Tokyo Metropolitan Government Office, huge hands of great luck were exhibited.
    In Japan, this is called “KUMADE”.
    It write this spelling of “KUMADE” as a bear’s hand.
    This type of “KUMADE” is believed to be an auspicious item.

    There was a symbol of Tokyo Olympic Games and Paralympic Games to be held in 2020.

    I would like to go to the observatory in the south next time.


  • 東京都庁の北側展望台に行ったので写真撮影しました。

    新宿に行ったついでに、都庁展望台北側に登りました。
    何枚か写真を撮影したので御覧ください。

    真下は新宿中央公園です。

    山の方まで家が建っているように見えます。

    この方向に富士山が見えるそうですが、今日は遠くに雲があるので見えませんね。

    少し高いビルは、大通り沿いに建っているのが判りますね。

    建物がびっしりです・・・

    左奥に見える霞の中を20倍ズームで撮影しました。

    こちらは中野駅方面だったと思います。

    都庁の模型が展示されていましたが、ちょっといい加減な展示でがっかりです・・・
    何なんですか?右側のチープなデスクライトは・・・

    都庁の一階には、大きな熊手が展示されていました。
    かなりの金額だと思います。

    2020年、東京オリンピックとパラリンピックのシンボルマークがありました。

    次回は南側の展望台に行ってみたいと思います。